For M.2 NVMe key M to PCI-E 5.0 X16 eGPU Adapter Cable for Notebook ITX/STX Graphics Card External to M.2 NVMe Docking Station

Product Model:F43SG

Product Name：M.2 NVMe key M to PCI-E 5.0 X16 Graphics Card Extension Cable

Cable Length: 25cm, 50cm

Speed Bandwidth: PCIe 5.0 x4, gen5 128G/bps

Graphics card compatibility: Support new graphics cards shipped after 2015 

(Older graphics cards shipped before 2015 are not supported.)

Motherboard Compatibility: Notebook, ITX/STX motherboards, NUC, 

support M.2 NVMe interface only .

Does not support M.2 SATA interface, Does not support M.2 WiFi interface, 

Does not support M.2 WWAN interface, Does not support USB interface.

Power supply: Support standard ATX 500W power supply, 

power supply should be prepared by the buyer.

Purchase Tips: Be sure to buy 1~2 samples first to test and verify 

the correctness before purchasing large quantities. 

Friendly reminder: incorrect assembly or improper operation will burn your equipment. 

Limited to professional engineers specified purchase.

Wire length and hole spacing description.

Cable length refers to the part of the visible cable, not including the adapter.

Screw hole spacing refer to the following figure size marking, 

cable length will have some error.

Product Image.

Warm tips: this product does not include power supply and graphics card.

Product Advantages.

1, Four LED indicators CLK, RST, 12V and 3V.

2, Aluminium alloy spacer, strong and durable, 

can effectively block interference and noise.

3, UL certified wire, 5th generation FFC flat cable design full 

coverage shielding, ultra-thin thickness of only 0.5mm.

4, four-layer PCB board, advanced design, exquisite craftsmanship, 

signal stability and fast, excellent wiring, good isolation, 

high-frequency impedance board up to PCIe 5.0 standards.

5, UL certified PCB board, gold finger gold plating 10µ’, 

good conductivity, can reduce oxidation and rust impedance 

rise caused by the problem of blue screen of death. 

6、Connector shell material is PA10T/LCP, gold-plated 15µ"-terminal 

resistance to insertion and removal, 

high-frequency in line with RoHS/Free (HF) requirements.

Feature:

Measured PCIe 5.0 full speed transfer.

Thickness of the cable is 0.5mm, which makes it ultra-thin.

FFC cable is detachable at both ends, highlighting the convenience. 

In order to avoid plugging and unplugging loss, 

the FFC cable is only allowed to be disassembled and reassembled 10 times.

Flat cable design, full-coverage shielding, new EMI materials to reduce 

electromagnetic interference and solve performance degradation problems.

Excellent PCB process: PCB production precision, copper thickness 1oz thicker, 

gold finger fully plated 10µ’ to reduce the risk of oxidation.

Soft and Durable: The cable itself is soft and durable, and the insertion and 

removal points are reinforced with 2mm aluminium spacers to eliminate 

wire breakage and drop problems.

The cables can be bent and folded for greater flexibility, 

and they are easy to manage compared to traditional round cables. 

Using FFC cables as a solution to space constraints in compact equipment, 

they are easy to install and use in tight spaces without affecting electronic components.

Technical Question Summary.

What are the options for external power supplies for the ADT F43SG?

Standard ATX 500W+ power supplies are supported.

ATX power supply wiring method is as follows: 

(Recommended for ATX power supplies above 500W), 

the graphics card power cable of the chassis power supply, 

plug it directly into the graphics card.

The top right is the graphics card power supply, 

and the bottom is the motherboard 24P power supply, please install it.

What is the purpose of the ADT F3G with a switch on it?

SW1, power forced start switch, 1 is auto start, 

2 is forced start, please cut to 1 auto start can be.

What are the supported laptops for ADT F3G? 

Is there any way to use it properly?

Laptops must have an unused M.2 NVMe interface , 

if you have a Thunderbolt-compatible 3 interface you need to buy a 

product with a Thunderbolt-compatible box to install and use it.

Currently known Nvidia-compatible with the latest win10 driver support 

for external and exclusive display, 

USB external display, set of coexisting display can be used normally SW1, 

power forced start switch, 1 for automatic startup, 2 for forced startup, 

please switch to 1 automatic startup.

Is PCIe 5.0 x4 full speed supported?

Yes, PCIe 5.0 x4 full speed is supported and stable.

Purchase Notes.

1. Plug in the line must be clear direction, do not insert the reverse or insert bias, 

to prevent burning equipment, plug in the line first hold the equipment socket 

and then plug in the line, to avoid excessive force will be the socket pin plug off. 

The second end of the wire and the circuit board within 2cm of the welded 

prohibit bending prohibit pulling.

2. a variety of motherboards and equipment signal drive ability and other conditions 

are not the same, we do not guarantee and your test results are consistent, 

as long as it is connected to the extension cord, the signal will have loss, 

the requirements of the perfect person, please do not buy.

3. graphics card or motherboard is an electronic device will increase with time 

and aging oxidation, and then connected to the extension cable will only be more unstable. 

Does not support old devices. 

If your device is more than three years or more does not support.

4. Purchase is limited to product engineers designated for product testing purposes only.